Industrial burner systems
Line burner type BLB
Hot gas generation for directly heated drying systems
Hot gases are needed for various industrial processes, particularly for the direct heating drying systems. Siempelkamp Energy & Drying Solutions (formerly Büttner) line burners are designed to produce hot gas robustly and efficiently and operate on natural gas. They have proven themselves worldwide in the wood-based panel industry, the cement industry, in mill construction and at many other industrial facilities. Our line burners are extremely robust, safe and low-maintenance.
Our line burner BLB consists of a performance-dependent number of ramps, which have been realised from individual modules and pre-assembled in a duct section. Control ranges of up to 1:30 are possible depending on the number of ramps. The scope of delivery includes the pre-assembled gas control train, the base and pilot burner with integrated ignition transformer and ionisation electrode as well as all safety-relevant fittings.
Our line burners are characterised by an especially maintenance-friendly design and low cost replacement parts.
The modular design allows the ionisation electrodes to be changed from the outside and the mixing plates to be replaced individually.
At a glance
- Output range from 0.5 MW up to more than 58 MW
- Easy to service modular construction
- Very slight pressure loss throughout the burner (approximately 2 mbar) means energy savings of over 50 percent
- The mixing device is specially designed to allow for exhaust gas with a very low pollutant level, whilst simultaneously cooling the components effectively
- Very high flame stability
- Vacuum and pressure operation possible
- Ignition takes place centrally on the base burner by means of a separate pilot burner
- Flame monitoring at two points only. Directly at the pilot burner and at the other end of the base burner